Jupyter on Euler and Leonhard Open
- 1 Introduction
- 2 Installation
- 3 Running the script
- 4 Modifications of the script
Since Jupyter notebooks are becoming more widely used among the scientific community, the HPC group developed a script that you can run on your local computer. This shell script then starts a Jupyter notebook in a batch job on Euler/Leonhard Open (depending on which cluster you choose) and connects your local browser with it.
At the moment, the script can be used with Linux and Mac computers. There is no support for Windows computers. Maybe Windows user can try to run the script using Windows subsystem for Linux (WSL), but this has not been tested yet.
Please note, that the script uses the old software stack on Euler and can in its current state not be used with tools from the new software stack.
In order to use this script, users need to make sure, that they have set up SSH keys for passwordless access to the cluster:
Please note that the example on the wiki refers to the Euler cluster and for Leonhard Open, then hostname needs to be changed from
please make sure that xdg-open is installed. This package is used to automatically start your default browser. You can install it with the following command:
yum install xdg-utils
apt-get install xdg-utils
Download and setup
The script is available on the Gitlab instance of ETH Zurich:
Download the repository with the command
Mac OS X:
After downloading the script from gitlab.ethz.ch, you need to change its permissions to make it executable
chmod 755 start_jupyter_nb.sh
Updating the script
- 01 Oct 2019 — Today the script has been updated, such that the jupyter notebooks have next to the Python 3.6 kernel also a bash and an R kernel (3.6.0 on Euler, 3.5.1 on Leonhard Open) available. If you use an older version of the script and you would like to use the newly added kernels, then you need to update your script from the gitlab repository with the command git pull origin master
samfux@bullvalene:~/Jupyter-on-Euler-or-Leonhard-Open$ git pull origin master warning: redirecting to https://gitlab.ethz.ch/sfux/Jupyter-on-Euler-or-Leonhard-Open.git/ From https://gitlab.ethz.ch/sfux/Jupyter-on-Euler-or-Leonhard-Open * branch master -> FETCH_HEAD Already up to date. samfux@bullvalene:~/Jupyter-on-Euler-or-Leonhard-Open$
Using SSH keys with non-default names
Since the reopening of Euler and Leonhard Open after the cyber attack in May 2020, we recommend to the cluster users to use SSH keys. We recommend to use different keys for Euler and Leonhard Open, with according names
In order to use those keys with the jupyter script, then there are two options.
You can configure your ssh client to use this option automatically by adding the following lines in the $HOME/.ssh/config file on your local computer:
Host login.leonhard.ethz.ch IdentityFile ~/.ssh/id_ed25519_leonhard Host euler.ethz.ch IdentityFile ~/.ssh/id_ed25519_euler
or you would need to edit the following section at the beginning of the script and add the path to your SSH keys. In the example below we show how this would look like for Euler:
######################### # Configuration options # ######################### # SSH key location is the path to your SSH key. Please specify the path if you are using a non-standard name for your SSH key SSH_KEY_LOCATION="$HOME/.ssh/id_ed255519_euler" # Waiting time interval after starting the jupyter notebook. Check every $WAITING_TIME_INTERVAL seconds if the job already started WAITING_TIME_INTERVAL=60 ############################# # End configuration options # #############################
Both options work and are equivalent.
Installing additional Python and R packages locally
When starting a Jupyter notebook with this script, then it will use a central Python and R installation:
- Euler: python/3.6.1, r/3.6.0
- Leonhard Open: python_cpu/3.6.4, r/3.5.1
Therefore you can only use packages that are centrally installed out-of-the-box. But you have the option to install additional packages locally in your home directory, which can afterwards be used.
For installing a Python package from inside a Jupyter notebook, you would need to run the following command:
!pip install --user package_name
This will install package_name into $HOME/.local, as described on our wiki page about Python:
The command to locally install an R package:
Then follow the instructions provided on our wiki:
Running the script
The start_jupyer_nb.sh script needs to be executed on your local computer:
./start_jupyter_nb.sh CLUSTER ETH_USERNAME NUM_CORES RUN_TIME MEM_PER_CORE
|CLUSTER||Name of the cluster (Euler or LeoOpen)|
|ETH_USERNAME||ETH username for which the notebook should be started|
|NUM_CORES||Number of cores to be used on the cluster (maximum: 36)|
|RUN_TIME||Run time limit for the jupyter notebook on the cluster (HH:MM)|
|MEM_PER_CORE||Memory limit in MB per core|
./start_jupyter_nb.sh Euler sfux 4 01:20 2048
Reconnect to a Jupyter notebook
When running the script, it creates a local file called reconnect_info in the installation directory, which contains all information regarding the used ports, the remote ip address, the command for the SSH tunnel and the URL for the browser. This information should be sufficient to reconnect to a Jupyter notebook if connection was lost.
Running multiple notebooks in a single Jupyter instance
If you run Jupyter on the Leonhard cluster, using GPUs (the default version of the uses a python_cpu module, which does not support GPU usage. You would need to change the Python version in the script to enable GPU usage), then you need to make sure a notebook is correctly terminated before you can start another one.
If you don't properly close the first notebook and run a second one, then the previous notebook will still occupy some GPU memory and have processes running, which will throw some errors, when executing the second notebook.
Therefore please make sure that you stop running kernels in the "running" tab in the browser, before starting a new notebook.
Terminate the Jupyter session
Please note that when you finish working with the jupyter notebook, you need to click on the "Quit" or "Logout" button in your Browser. "Quit" will stop the batch job running on Euler, "Logout" will just log you out from the session but not stop the batch job (in this case you need to login to the cluster, identify the job with bjobs and then kill it with the bkill command, using the jobid as parameter). Afterwards you also need to clean up the SSH tunnel that is running in the background.
samfux@bullvalene:~/Jupyter-on-Euler-or-Leonhard-Open$ ps -u | grep -m1 -- "-L" | grep -- "-N" samfux 8729 0.0 0.0 59404 6636 pts/5 S 13:46 0:00 ssh email@example.com -L 51339:10.205.4.122:8888 -N samfux@bullvalene:~/jupyter-on-Euler-or-Leonhard-Open$ kill 8729
Modifications of the script
Starting in a different location than your home directory
By default, the Jupyter notebook will start in your home directory. It is also possible to start in a different location. For this you would need to change line 122 in the script from
jupyter notebook --no-browser --ip "\$IP_REMOTE" &> /cluster/home/$USERNAME/jnbinfo
jupyter notebook --no-browser --ip "\$IP_REMOTE" --notebook-dir PATH &> /cluster/home/$USERNAME/jnbinfo
where PATH needs to be replaced with the path in which the Jupyter notebook should start.
Using a different Python installation, e.g., one from the new software stack
For changing the Python environment used by the script, it is sufficient to change the string in PCOMMAND:
if [ "$CLUSTERNAME" == "Euler" ]; then CHOSTNAME="euler.ethz.ch" PCOMMAND="new gcc/4.8.2 r/3.6.0 python/3.6.1 eth_proxy" elif [ "$CLUSTERNAME" == "LeoOpen" ]; then CHOSTNAME="login.leonhard.ethz.ch" PCOMMAND="r/3.5.1 python_cpu/3.6.4 eth_proxy" else echo -e "Incorrect cluster name. Please specify Euler or LeoOpen as cluster and and try again.\n" print_usage exit fi
You can replace it with a different set of modules. Currently the script uses the old software stack, but you can also change this. For using the new software stack, you would need to make it the default software stack that is initialized upon login.