New SPACK software stack on Euler
We are in the transition phase from the old to new software stack on Euler. The old software stack will be kept on an as-is basis to allow reproducing older results. New software is only installed in the new software stack. It is set up with the package manager SPACK on Euler using the LMOD module system. The new software stack will have 4 basic toolchains (GCC 4.8.5, GCC 6.3.0, GCC 8.2.0 and Intel 18.0.1). A toolchain is a combination of compiler, MPI and BLAS/LAPACK library. For each of the toolchains, we currently provide several hundred software packages.
Differences between the old and the new software stack
- The old software stack was mainly based on manual software installation, not using a package manager. Most packages were available for the standard compiler and only a limited subset of libraries was available for newer compilers as well. In the new software stack, we have put more emphasis on the concept of toolchains, providing most packages for all compilers.
- In the old software stacks, users often had to load modules for the dependencies of a main program. In the new software stack, it is sufficient to load the module of the main program and all dependencies will be loaded automatically (one exception is MPI, as MPI modules need to be loaded to access those branches of the toolchains).
Old software stack: module load new gcc/4.8.2 open_mpi/1.6.5 boost/1.59.0_py2.7.9 mpfr/3.1.2_gmp6 qt/4.8.4 netcdf/4.3.2 eigen/3.2.1 swig/3.0.5 suitesparse/4.4.4 fenics/1.6.0
New software stack: module load gcc/6.3.0 openmpi/3.0.1 fenics/2019.1.0_slepc
- In the old software stack, it was possible to use packages compiled with a different compiler together, which often caused issues. In the new software stack, the module hierarchy ensures that only packages that were compiled with the same compiler version can be used together.
A few selected users (early beta testers) have been using the new software stack since end of August 2018. The open beta testing phase of the new software stack started on 10 December 2018. The old software stack is still set as default, but users can switch between the old and the new software stack by using the commands env2lmod and lmod2env. New software installations will be done in the new software stack. During 2019, a large part of the new software stack has been built (when counting all packages from all toolchains, currently 3208 packages are provided). A list of all software that is present in the old software stack but not yet in the new is provided here, including a separate list for the GDC software stack.
When the beta testing phase is over, the new software stack will be set as default on login. To access the old software stack, users will then have to use the command lmod2env.
LMOD allows to define a hierarchy of modules containing 3 layers (Core, Compiler, MPI). The core layer contains all module files which are not depending on any compiler/MPI. The compiler layer contains all modules which are depending on a particular compilers, but not on any MPI library. The MPI layer contains modules that are depending on a particular compiler/MPI combination.
When you login to the Leonhard cluster, the standard compiler gcc/4.8.5 is automatically loaded. Running the module avail command displays all modules that are available for gcc/4.8.5. If you would like to see the modules available for a different compiler, for instance gcc/6.3.0, then you would need to load the compiler module and run module avail again. For checking out the available modules for gcc/4.8.5 openmpi/3.0.1, you would load the corresponding compiler and MPI module and run again module avail.
As a consequence of the module hierarchy, you can never have two different versions of the same module loaded at the same time. This helps to avoid problems arising due to misconfiguration of the environment.
You can find an overview on all packages that are available in the new software stack on our wiki.
Switching between software stacks
It is possible to switch back and forth between the old and the new software stack, but they cannot be mixed. Please use the commands env2lua and lmod2env for this. These are aliases that source a script that changes the environment of the current shell.
Switching from the old to the new software stack:
Switching from the new to the old software stack:
Changing the software stack will unload all previously loaded modules before the switch.
Loading some modules in the old software stack:
[sfux@eu-login-16-ng ~]$ module load new gcc/4.8.2 open_mpi/1.6.5 openblas/0.2.8_seq [sfux@eu-login-16-ng ~]$ module list Currently Loaded Modulefiles: 1) modules 3) gcc/4.8.2(default:4.8) 5) openblas/0.2.8_seq(0.2.8) 2) new 4) open_mpi/1.6.5(1.6:default)
Switching to the new software stack and load some modules:
[sfux@eu-login-16-ng ~]$ env2lmod [sfux@eu-login-16-ng ~]$ module list Currently Loaded Modules: 1) StdEnv 2) gcc/4.8.5 [sfux@eu-login-16-ng ~]$ module load intel/18.0.1 openmpi/3.0.1 openblas/0.2.20 Lmod is automatically replacing "gcc/4.8.5" with "intel/18.0.1". [sfux@eu-login-16-ng ~]$
Switching back to the old software stack and loading again some modules:
[sfux@eu-login-16-ng ~]$ lmod2env [sfux@eu-login-16-ng ~]$ module list Currently Loaded Modulefiles: 1) modules [sfux@eu-login-16-ng ~]$ module load new gcc/4.8.2 open_mpi/1.6.5 openblas/0.2.8_seq [sfux@eu-login-16-ng ~]$ module list Currently Loaded Modulefiles: 1) modules 3) gcc/4.8.2(default:4.8) 5) openblas/0.2.8_seq(0.2.8) 2) new 4) open_mpi/1.6.5(1.6:default) [sfux@eu-login-16-ng ~]$